AT2Lite

Accessories
Motor Brackets
ISOBus
Motor Spline Adapter

0 FjDynamics AT2Lite The new FjDynamics AT2 Lite features an improved, light-weight motor, and builds on the ultra-sleek AG1 Display. Best of all? No Cables! The motor and receiver are wirelessly connected to the display, saving space for small cabs. This is an incredibly inexpensive, easy to use, simple autosteer system which gives you access to WAAS and PPP guidance methods, and simple steering & IsoBus control without any of the hassle. Add to cart ~~6,999.50 $~~ 6,250.00 $ 6250.0 CAD	0 FjDynamics ISOBus Kit - In Cab - IsoBus Ready Tractor - AT2Lite / AG1 The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required. This is the full harness kit for the AT2 Lite and AG1 for tractors with an existing ISOBUS harness and in-cab connection. Add to cart 869.00 $ 869.0 CAD	0 FjDynamics ISOBus Kit - Full Harness - AT2Lite / AG1 The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required. This is the full harness kit for the AT2 Lite and AG1 for tractors without ISOBUS harnesses built in. Add to cart 869.00 $ 869.0 CAD	0 #6 Advanced Motor Bracket Universal Mounting Bracket. This bracket fits the majority of equipment and combines functionality of brackets 1-5. Add to cart 210.00 $ 210.0 CAD
0 #4 Motor Bracket Extension shaft clamping motor bracket Add to cart 184.00 $ 184.0 CAD	0 #20 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #20 Hub. Splines: 48 Diameter: 19.3mm Height: 75mm Fits: JCB 3170, 3190, and Fastrac series. Add to cart 112.00 $ 112.0 CAD	0 #19 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 17.775mm Height: 75mm Fits: Challenger: A, B, C, D, E series two-digit tractors (E.G. 65, 75, 85) SOME Steiger 9100, 9200, 9300 series tractors Add to cart 112.00 $ 112.0 CAD	0 #18 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #18 Hub. Splines: 40 Diameter: 17.704 mm Height: 75 mm Fits: New Holland T5, TM, TL, and TS Series Tractors CaseIH MXM, JXU, Farmall series Add to cart 112.00 $ 112.0 CAD
0 #14 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #14 Hub. Splines: 36 Diameter: 15.697mm Height: 75mm Fits: Challenger: MT, MT-A, MT-B, MT-C, MT-D, MT-E 400, 500, 600 Series tractors Massey Ferguson: 5-, 6-, 7-, and 8- series tractors Claas: Arion 500 and 600 series; Axion 800 Series. Add to cart 112.00 $ 112.0 CAD	0 CHDP-1 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the a custom manufactured special hub. Splines: 0 - round hole. Diameter: 0.75" Height: 125mm Fits: Macdon, Prairie Star, Westward Swathers, 8, 9 series, and M-150 and early M155's with a round 3/4" shaft, with a roll pin hole. Add to cart 112.00 $ 112.0 CAD	0 #13 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 20.3 mm Height: 75mm Fits: Fendt 200, 300, 400, 500, 700, 800, 900 Vario and older tractors Deutz 7 Series, M Series, TTV Series, and 265 Case IH CVX Series Add to cart 112.00 $ 112.0 CAD	0 #24 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: None; Keyed Shaft, 5mm key. Diameter: 24.35 mm Height: 75mm Fits: Claas Lexion, Tucano, Dominator combines. Add to cart 112.00 $ 112.0 CAD
0 #57 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #57 Hub. Splines: 32 Diameter: 28mm Height: 75 mm Fits: Willmar and Spra-Coupe Sprayers Add to cart 112.00 $ 112.0 CAD	0 #15 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #15 Hub. Splines: 36 Diameter: 15.875mm Height: 125mm Fits: Case IH and New Holland 4WD and large frame FWA tractors, among others. Add to cart 112.00 $ 112.0 CAD	0 #6 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #6 Hub. Splines: 36 Diameter: 15.875mm Height: 75mm Fits: Case IH and New Holland (older) That do not have the large left hand shifter and accompanying console. For tractors which do have the left hand shifter and console, please use #15, which is longer. Add to cart 112.00 $ 112.0 CAD	0 #4 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 22.1mm Height: 75mm Fits: Most common hub. Fits John Deere (most models), Versatile (all models), and many more. Add to cart 112.00 $ 112.0 CAD
0 #2 Motor Bracket Heavy Duty, High Torque clamping bracket for round steering tubes with a diameter of 1 1/2" +/- 1/4". Add to cart 100.00 $ 100.0 CAD	0 #3 Motor Bracket Heavy Duty, High Torque clamping bracket for round steering tubes with a diameter of 1 1/2" +/- 1/4". Add to cart 85.00 $ 85.0 CAD	0 #5 Motor Bracket Similar to #1 Bracket, but with more offset for smaller consoles. Add to cart 65.00 $ 65.0 CAD	0 #1 Motor Bracket Bracket style #1. Braces against existing plastic dash. Add to cart 65.00 $ 65.0 CAD