AT2 MAX

Accessories
Motor Brackets
Motor Spline Adapter
ISOBUS

0 FjDynamics AT2 MAX Autosteer Kit The AT2 MAX Autosteer system by FjDynamics is a powerful system capable of steering any vehicle which currently has a steering wheel. The system consists of a roof-mounted Smart Receiver, a Steering wheel unit which replaces the factory steering wheel and a 12" high-visibility touch screen display. The unit is capable of operating 256 sections through its IsoBUS capability making it the perfect fit for nozzle-by-nozzle sprayer controls. With many splines and brackets available, this system can be customized to fit anything from Swathers and Tractors to Combines and Sprayers. Add to cart ~~10,995.90 $~~ 9,500.00 $ 9500.0 CAD	0 Implement Guidance (Path Assist) "Path Assist" Is a secondary receiver, placed on the implement, for instance an air drill, it then allows the GPS system to place the implement on the line, instead of the tractor. Accounting for side-hill drift, long implements, draft, and uneven operating conditions. It also gives the option to use NMEA positioning data from the secondary receiver - meaning your sectional control will be based on the actual position of the drill, instead of the estimated position based on tractor location. PathAssist is compatible with all steering systems except AT2Lite. Add to cart 3,675.00 $ 3675.0 CAD	0 FjDynamics ISOBus Kit - Full Harness - AS2 / AT2MAX / AH2 The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required. This is the kit for the AS2, AT2Max, and AH2 units; Generation 8 terminals. Add to cart 869.00 $ 869.0 CAD	0 FjDynamics Coverage Recording Switch The FjDynamics Acre Recording Switch mounts to your implement, and senses it's position to enable and disable automatic coverage on the screen. This unit is ideal in cases where there is no electronic control for enabling or disabling coverage logging using electronic means. Add to cart 525.00 $ 525.0 CAD
0 Machine CAN Data Connector (WiFi-OBD Module) The FjDynamics WiFi OBD module allows for the machine to seamlessly communicate with the FjDynamics autosteering system already installed. This allows for critical information such as service codes, engine RPM, engine load, working rate, etc. to be shown on the FJD Display, and, in addition, logged to the FarmFusion Farm Management platform... This data can also be sent to the FjDynamics App on mobile devices, so you always know what's going on with machines in the field. Add to cart 505.25 $ 505.25 CAD	0 FjDynamics Easy Control The FjDynamics Easy Control remote is a Bluetooth-Enabled remote control allowing for easy Engagement and management of the autosteer system without having to use the touch screen. Add to cart 449.95 $ 449.95 CAD	0 FjDynamics ISOBus Kit - In Cab - IsoBus Ready Tractor - AS2 / AT2MAX / AH2 The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required. This is the kit for the AS2, AT2Max, and AH2 units; Generation 8 terminals. Add to cart 429.50 $ 429.5 CAD	0 FjDynamics Wireless Camera (Power from 12v Source) The FjDynamics Wireless Camera allows for crystal-clear High Definition streaming back to any FJ display. Up to two cameras are supported at any given time. The cameras come with a 7M (22ft) power cord, and support up to a 20M (80ft) transmission distance. Extra cabling is available. Add to cart 375.00 $ 375.0 CAD
0 FjDynamics Wireless Camera (Power from FJD Harness) The FjDynamics Wireless Camera allows for crystal-clear High Definition streaming back to any FJ display. Up to two cameras are supported at any given time. The cameras come with a 7M (22ft) power cord, and support up to a 20M (80ft) transmission distance. Extra cabling is available. Add to cart 375.00 $ 375.0 CAD	0 FjDynamics Easy Switch /w Foot Pedal (ES1-F) The Easy-Switch Is a foot & push button accessory which allows you to engage and disengage your autosteer system without needing to touch the screen. This kit includes the accessory harness, the foot switch, and the push button. You can use either, or both as necessary in your application. Add to cart 318.50 $ 318.5 CAD	0 FjDynamics Wired Camera The FjDynamics Wired camera provides a reliable, crystal clear picture to the FJD monitor; designed to connect through the already existing plug on the FJD display's accessory harness, this camera provides power and signal through one, shielded harness. Monitors support up to two cameras. Add to cart 285.00 $ 285.0 CAD	0 FjDynamics Radar Output Harness The Radar-Out harness allows you to send square-wave radar speed signals to either an aftermarket rate controller, or the machine's built in computer, replacing the bulky radar attached to the unit. Add to cart 212.00 $ 212.0 CAD
0 #6 Advanced Motor Bracket Universal Mounting Bracket. This bracket fits the majority of equipment and combines functionality of brackets 1-5. Add to cart 210.00 $ 210.0 CAD	0 FjDynamics Easy Switch (ES1) The EasySwitch is a Push-Button switch which can be integrated into the armrest, joystick, or console of a machine to allow for rapid, easy engagement of the autosteer without the use of the touch screen. Add to cart 209.00 $ 209.0 CAD	0 #4 Motor Bracket Extension shaft clamping motor bracket Add to cart 184.00 $ 184.0 CAD	0 FjDynamics NMEA-Out Harness This harness allows GPS NMEA data to be output from FjDynamics' autosteer systems into other controllers... I.E. for Air-drills, Planters, Sprayers, etc. Connector is standard 9-pin serial. Add to cart 156.75 $ 156.75 CAD
0 Mini Control The FjDynamics MiniControl is a simple, one-button pushbutton for engaging and disengaging the autosteer. Tape it, or screw it anywhere in the cab. It is 1" around, and 3/8" tall. No need for any external wires, as it connects wirelessly to the GPS system. Add to cart 129.95 $ 129.95 CAD	0 FjDynamics Coverage Recording Harness The FjDynamics Acre Recording Harness ties into existing relays or switches to enable automatic coverage logging based on electronic signals. Add to cart 129.75 $ 129.75 CAD	0 #20 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #20 Hub. Splines: 48 Diameter: 19.3mm Height: 75mm Fits: JCB 3170, 3190, and Fastrac series. Add to cart 112.00 $ 112.0 CAD	0 #19 Spline Hub Adapter Motor Hub Adapter; Included with every kit, but also purchased separately. These hubs fit different steering columns. Check your measurements accurately before ordering or contact our sales staff for confirmation. This is the #4 Hub. Splines: 36 Diameter: 17.775mm Height: 75mm Fits: Challenger: A, B, C, D, E series two-digit tractors (E.G. 65, 75, 85) SOME Steiger 9100, 9200, 9300 series tractors Add to cart 112.00 $ 112.0 CAD