• Guidance Only
  • Autosteer - Wheel Motor
  • Autosteer - Hydraulic Valve
  • Autosteer - Integrated CANBUS
  • Product Control
  • Land Leveling & Ditching
  • Accessories
  • Farm Management Software - FieldFusion
  • RTK Base Stations
  • Yield Monitoring
  • Licenses
    0
FjDynamics AL02 Landforming Completions Kit
This is the VCU, Harnessing, and Implement Receiver required to integrate the FjDynamics Landforming system with an existing AH2, AT2, or AS2 system. This is view Only; The valve is required for machine control as well.
4,250.00 $ 3,875.00 $ 3875.0 CAD
    0
FjDynamics AL02 Landforming Hydraulic Valve
This is the hydraulic valve required for full automated control of all FjDynamics AL02 landforming options. This valve is included in the premium packages, and can be purchased separately for the standard options.
4,129.99 $ 3,750.00 $ 3750.0 CAD
    0
Implement Guidance (Path Assist)
"Path Assist" Is a secondary receiver, placed on the implement, for instance an air drill, it then allows the GPS system to place the implement on the line, instead of the tractor. Accounting for side-hill drift, long implements, draft, and uneven operating conditions. It also gives the option to use NMEA positioning data from the secondary receiver - meaning your sectional control will be based on the actual position of the drill, instead of the estimated position based on tractor location. PathAssist is compatible with all steering systems except AT2Lite.
3,675.00 $ 3,499.00 $ 3499.0 CAD
    0
FjDynamics AG1 Guidance System
The FjDynamics' AG1 Guidance system is a simple, light-bar & guidance only solution for coverage mapping. It can be expanded for use with ISOBUS with the appropriate accessory harness, and it can also be used as a dual-screen solution for the A*2 line of steering systems.
2,850.00 $ 2850.0 CAD
    0
FjDynamics High Flow, Open Center Hydraulic Valve
This is the 60 L/Min (18Gal/Min) Open center hydraulic valve used for very large articulated tractors that were manufactured in the 1970s and 1980s, and other special use cases. This valve is compatible with AH1 and AH2.
2,077.00 $ 2077.0 CAD
    0
FjDynamics Standard Flow, Closed Center Hydraulic Valve
This is the 30L/Min (8GPM) Closed center hydraulic valve used for most tractors and combines. For any equipment past mid nineties, excluding large articulated tractors, this is the standard valve that is used.
1,992.00 $ 1992.0 CAD
    0
FjDynamics Standard Flow, Open Center Hydraulic Valve
This is the 30L/Min (8GPM) Open center hydraulic valve used for older tractors and combines. This valve is also used for 400 and 500 series Lexion combines. Except for some very large 1970s-1980s articulated tractors, this valve is what would be used on 1960s-1990s equipment.
1,989.50 $ 1989.5 CAD
    0
FjDynamics High Flow, Closed Center Hydraulic Valve
This is the 60 L/Min (18Gal/Min) Closed center hydraulic valve used for very large articulated tractors, and other special use cases. This valve is compatible with AH1 and AH2.
1,989.50 $ 1989.5 CAD
    0
FjDynamics ISOBus Kit - Full Harness - AT2 / AT1 / AH1
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.
1,499.00 $ 1499.0 CAD
    0
Kubota AS2 CAN Harness Kit
Kubota Harnessing for compatible Auto-steer ready tractors. Kit includes the Kubota Autosteer switch required for install, P/N 3J032-74860 plus FjDynamics' Harnesses.

Please contact our support team at support@chdp.ca for details on which models are supported.

1,075.00 $ 1075.0 CAD
    0
Advanced U-Turn Automatic Turns Functionality (All FJD Displays)
FJDynamics Advanced U-Turn License

One-time purchase. Fully automatic, boundary-aware headland turns.

This is the hands-off version. The Advanced U-Turn license (Smart U-Turn) lets your FJDynamics autosteer system read your field boundary and plan the best turning path. It then turns the tractor around automatically at every headland, with no tap on the screen needed. When the middle of the field is finished, it closes out the headlands for you, so the field gets done from start to finish with minimal input from the operator.

What it does

Turns automatically at every headland, with no tap at each turn
Analyzes the field boundary to plan the most efficient turn path, and skips areas that are already worked
Needs a smaller headland area than competing systems, based on FJD’s comparison, so you lose less ground and spend less time turning
Auto Headland Closing finishes the headland with one or two laps once the middle of the field is done
Cuts overlap and skips and keeps every pass consistent, which frees the operator to focus entirely on the implement

Licensing

One-time cost. No annual subscription and no renewal fees
License is activated on your FJD display and stays enabled for the life of that unit

Requirements

FJDynamics AT1 or AT2 autosteer system
Field boundary and guidance lines recorded for the field
Turn radius configured for your tractor and implement during setup
Contact ChDp to confirm compatibility with your system before ordering

Questions or need it installed? Call ChDp Ventures at 1-877-307-6041.
950.00 $ 950.0 CAD
    0
CaseIH, New Holland, Steyr AS2 CAN Steer Harness Kit
Kit includes all harnesses and Antenna mount for CNH tractors, to allow quick and easy removal / installation in existing brackets.

Please contact our support team at support@chdp.ca for details on which models are supported.

870.00 $ 870.0 CAD
    0
FjDynamics ISOBus Kit - In Cab - IsoBus Ready Tractor - AT2Lite / AG1
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.

This is the full harness kit for the AT2 Lite and AG1 for tractors with an existing ISOBUS harness and in-cab connection.
869.00 $ 869.0 CAD
    0
FjDynamics ISOBus Kit - Full Harness - AT2Lite / AG1
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.

This is the full harness kit for the AT2 Lite and AG1 for tractors without ISOBUS harnesses built in.
869.00 $ 869.0 CAD
    0
FjDynamics ISOBus Kit - Full Harness - AS2 / AT2MAX / AH2
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.

This is the kit for the AS2, AT2Max, and AH2 units; Generation 8 terminals.
869.00 $ 869.0 CAD
    0
FjDynamics ISOBus Kit - In Cab - IsoBus Ready Tractor - AT2/AT1/AH1
The FjDynamics ISO Kit allows you to connect any ISOBus (ISO 11783) compliant implement and control it through any of the FjDynamics autosteer systems. Additional licenses may be required.

This kit is for new tractors that have an Isobus plug inside the cab; This harness kit goes from the monitor to the incab plug for the AT2 Gen 1/2 and AH1 and AT1 displays.
729.00 $ 729.0 CAD
    0
McCormick & Landini AS2 CAN Harness Kit
Kit includes all harnesses required for AS2 Integrated installation in Steer-ready McCormick and Landini tractors.

Please contact our support team at support@chdp.ca for details on which models are supported.

699.50 $ 699.5 CAD
    0
AUX-N External Controls Input Unlock (All FJD Displays)
FJDynamics AUX-N Auxiliary Control License

One-time purchase. Run your implement functions from a joystick or switch box.

Keep your hands where the work is. The AUX-N (Auxiliary Control – New) license lets your FJDynamics system work with ISOBUS auxiliary input devices such as joysticks and switch boxes. Assign implement functions like folding, lifting, markers, hydraulics or rate changes to physical buttons, and operate them with a single press instead of tapping through screens on the display.

What it does

Maps implement functions to buttons on a compatible ISOBUS joystick or switch box
Lets you operate complex implements faster and more safely, with fewer screen touches at the headland
Works across brands, so you can use one ISOBUS input device to control compatible implements from different manufacturers
Cuts operator fatigue on long days and on busy turns

Licensing

One-time cost. No annual subscription and no renewal fees
License is activated on your FJD display and stays enabled for the life of that unit

Requirements

FJDynamics autosteer/guidance system with ISOBUS connection
ISOBUS implement that supports AUX-N auxiliary control
AUX-N compatible joystick or switch box (sold separately)
Contact ChDp to confirm compatibility with your specific implement and input device before ordering

Pairs well with: the TC-SC Section Control and TC-GEO Variable Rate licenses, which together give you full ISOBUS control from your FJD display.

Questions or need it installed? Call ChDp Ventures at 1-877-307-6041.
650.00 $ 650.0 CAD
    0
TC-GEO Prescription Rate Application License (All FJD Displays)
FJDynamics TC-GEO Variable Rate License

One-time purchase. Unlock prescription-based variable rate on your FJD system.

Put product only where it pays. The TC-GEO (Task Controller – Geo-Based) license enables variable rate application on your FJDynamics guidance system. Load a prescription map and your FJD display will automatically adjust your ISOBUS implement’s application rate as you move across the field, putting more where the ground can use it and less where it can’t. Every pass is recorded as you go.

What it does

Reads your prescription map and changes rates automatically by zone, with no manual adjustments from the cab
Works with ISOBUS sprayers, air seeders, drills and spreaders that support TC-GEO
Logs as-applied data so you have a record of what went where
Gets more out of your seed, fertilizer and chemical by matching rates to field variability

Licensing

One-time cost. No annual subscription and no renewal fees
License is activated on your FJD display and stays enabled for the life of that unit

Requirements

FJDynamics autosteer/guidance system with ISOBUS connection
ISOBUS implement (or implement controller) that supports TC-GEO variable rate
Prescription map in a format supported by your FJD display
Contact ChDp to confirm compatibility with your specific implement before ordering

Pairs well with: the TC-SC Section Control License. Run both together for automatic section control and variable rate in a single pass.

Questions or need it installed? Call ChDp Ventures at 1-877-307-6041.
650.00 $ 650.0 CAD
    0
TC-SC Section Control License (All FJD Displays)
FJDynamics TC-SC Section Control License

One-time purchase. Unlock automatic section control on your FJD system.

Stop paying for overlap. The TC-SC (Task Controller – Section Control) license turns on automatic section control for your FJDynamics guidance system, so your ISOBUS implement’s sections switch on and off for you based on GPS position and the overlap settings you choose. Point rows, headlands, waterways and already-covered ground are handled automatically, with no manual switching required.

What it does

Shuts sections off over areas you’ve already covered and turns them back on when you return to unapplied ground
Works with ISOBUS sprayers, air seeders, drills and spreaders that support TC-SC
User-adjustable overlap settings to suit your crop, product and implement
Cuts input waste on seed, fertilizer and chemical, and reduces operator workload on long days

Licensing

One-time cost. No annual subscription and no renewal fees
License is activated on your FJD display and stays enabled for the life of that unit

Requirements

FJDynamics autosteer/guidance system with ISOBUS connection
ISOBUS implement (or implement controller) that supports TC-SC section control
Contact ChDp to confirm compatibility with your specific implement before ordering

Questions or need it installed? Call ChDp Ventures at 1-877-307-6041.
650.00 $ 650.0 CAD

To install this Web App in your ISO device press and then Add to Home Screen.